Qlogic SANbox2-8c Manual de Instalação descarregar pdf (Página 22)

22 Fibre Channel Switch 16 April, 2003

Trap Severity Options

---------------------

unknown, emergency, alert, critical, error, warning, notify, info, debug, mark

Contact (string, max=32 chars) ["On-call engineer"]

Location (string, max=32 chars) ["Rack 3-B"]

Trap1Address (dot-notated IP Address) [192.168.217.5]

Trap1Port (decimal value) [162]

Trap1Severity (see allowed options above) [warning]

Trap1Enabled (True / False) [True]

Trap2Address (dot-notated IP Address) [192.168.216.48]

Trap2Port (decimal value) [162]

Trap2Severity (see allowed options above) [warning]

Trap2Enabled (True / False) [True]

Trap3Address (dot-notated IP Address) [0.0.0.0]

Trap3Port (decimal value) [162]

Trap3Severity (see allowed options above) [warning]

Trap3Enabled (True / False) [False]

Trap4Address (dot-notated IP Address) [0.0.0.0]

Trap4Port (decimal value) [162]

Trap4Severity (see allowed options above) [warning]

Trap4Enabled (True / False) [False]

Trap5Address (dot-notated IP Address) [0.0.0.0]

Trap5Port (decimal value) [162]

Trap5Severity (see allowed options above) [warning]

Trap5Enabled (True / False) [False]

ReadCommunity (string, max=32 chars) [public]

WriteCommunity (string, max=32 chars) [private]

TrapCommunity (string, max=32 chars) [public]

AuthFailureTrap (True / False) [False]

Do you want to save and activate this snmp setup? (y/n): [n] y

Your monitoring station should now receive all traps from your Fibre Channel switch.

You can test this by creating a fault condition, such as disconnecting one of your Fibre

Channel connections to the Fibre Channel switch. A message should appear in the

NetCentral manager.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Qlogic SANbox2-8c Manual de Instalação Página 22