Qlogic iSR6200 Intelligent Storage Guia de Instalação Página 72

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 224
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 71
4–Configuration
Enabling Virtual Port Groups
4-6 ISR651101-00 H
The following example shows CLI command output using an iSR6200 blade with
three virtual port groups enabled. You can view information about the virtual port
groups configured on your iSR6200 by issuing the show vpgroups command.
iSR6200 <1> (admin) #> show vpgroups
VpGroup Information
---------------------
Index 1
VpGroup Name VPGROUP_1
Status Enabled
WWPNs 21:00:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f9
Index 2
VpGroup Name VPGROUP_2
Status Enabled
WWPNs 21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
Index 3
VpGroup Name VPGROUP_3
Status Enabled
WWPNs 21:02:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f9
Index 4
VpGroup Name VPGROUP_4
Status Disabled
WWPNs N/A
In the preceding examples, the second byte from the left (in bold text) denotes the
virtual port group ID, and the right-most byte (in italic text) denotes the physical
Fibre Channel port. In these examples VPGs 1 through 3 have corresponding
virtual ports with 00, 01, and 02 presented out of physical FC ports 0 and 1, with
WWPNs ending in f8 and f9, respectively.
Vista de página 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 223 224

Comentários a estes Manuais

Sem comentários