Qlogic QLE4062C Manual do Utilizador descarregar pdf (Página 8)

White Paper

# vi /kernel/drv/sd.conf

...

name=”sd” class=”scsi” target=0 lun=0;

name=”sd” class=”scsi” target=1 lun=0;

name=”sd” class=”scsi” target=2 lun=0;

name=”sd” class=”scsi” target=3 lun=0;

name=”sd” class=”scsi” target=3 lun=1;

name=”sd” class=”scsi” target=4 lun=0;

name=”sd” class=”scsi” target=4 lun=254;

name=”sd” class=”scsi” target=5 lun=0;

name=”sd” class=”scsi” target=6 lun=0;

name=”sd” class=”scsi” target=6 lun=1;

name=”sd” class=”scsi” target=7 lun=0;

name=”sd” class=”scsi” target=7 lun=254;

name=”sd” class=”scsi” target=8 lun=0;

name=”sd” class=”scsi” target=9 lun=0;

...

Reboot Solaris to let the settings work, then the disks will be detected.

8. Reboot Solaris to let the new disk setting validate, and use devfsadm command

to configure /dev namespace of new devices.

# devfsadm –Cv // Cleanup unused device

// names.

# devfsadm –i qla4xxx // configure the device

// names for the specified

// driver

Part 2: Software iSCSI initiator

1. Configure the device to be discovered dynamically (SendTargets).

# iscsiadm add discovery-address 192.168.11.112:3260

2. Enable SendTargets discovery method.

# iscsiadm modify discovery --sendtargets enable

3. Create the iSCSI device links in the /dev namespace.

# devfsadm –i iscsi

4. (Optional) Configure CHAP authentication for iSCSI initiator. Use the following

commands to set up CHAP secret key. Note that the length of CAHP secret must

be during 12 to 16 characters.

# iscsiadm modify initiator-node --CHAP-secret

5. (Optional) Set CHAP name of initiator.

# iscsiadm modify initiator-node --CHAP-name your-CHAP-name

6. (Optional) Enable CHAP authentication.

- 8 -

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Qlogic QLE4062C Manual do Utilizador Página 8