Qlogic SANbox 5602 Guia de Instalação descarregar pdf (Página 162)

B – Command Line Interface

Set Setup Command

B-58 59096-00 A

system

Prompts you in a line-by-line fashion to change system configuration settings.

Table B-14 describes the system configuration fields. For each parameter, enter a

new value or press the Enter key to accept the current value shown in brackets.

ReadCommunity Read community password that authorizes an SNMP agent

to read information from the switch. This is a write-only field.

The value on the switch and the SNMP management server

must be the same. The read community password can be up

to 32 characters excluding #, semicolon (;), and comma (,).

The default is “public”.

WriteCommunity Write community password that authorizes an SNMP agent

to write information to the switch. This is a write-only field.

The value on the switch and the SNMP management server

must be the same. The write community password can be

up to 32 characters excluding #, semicolon (;), and comma

(,). The default is “private”.

TrapCommunity Trap community password that authorizes an SNMP agent

to receive traps. This is a write-only field. The value on the

switch and the SNMP management server must be the

same. The trap community password can be up to 32

characters excluding #, semicolon (;), and comma (,). The

default is “public”.

AuthFailureTrap Enables (True) or disables (False) the generation of traps in

response to trap authentication failures. The default is False.

ProxyEnabled Enables (True) or disables (False) SNMP communication

with other switches in the fabric. The default is True.

Note: Changing the IP address will terminate all Ethernet management

sessions.

Table B-14. System Configuration Settings

Entry Description

Eth0NetworkDiscovery Ethernet boot method: 1 - Static, 2 - Bootp, 3 -

DHCP, 4 - RARP. The default is 1 - Static.

Eth0NetworkAddress Ethernet Internet Protocol (IP) address. The

default is 10.0.0.1.

Table B-13. SNMP Configuration Settings (Continued)

Entry Description

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 227 228

Sem comentários

Qlogic SANbox 5602 Guia de Instalação Página 162